1 reviews | Active since May 2012
Dunlop tyre defects
I have been running my vehicle with dunlop 225/45/17 SP6060 tyres all around since i purchased the vehicle 4 years ago. Less then a year ago i had a tyre replaced on my vehicle with a new SP6060 dunlop tyre. <br> <br> A few days ago i started to notice a slight vibration on my steering that significantly got worse the more i drove to a point where it felt undriveable. I took the vehicle into a superquick fitment centre and it was noticed that the new tyre which was installed on my vehicle was the culprit. <br> <br> Some how the tyre has lost its round shape despite there still being 90% tread left and the rim has no buckles or dents. <br> <br> The tyre expert at the fitment centre believes this is a factory defect. Whether the tyre was installed with the defect and balanced out no one will know as this was close to a year ago.<br> <br> At this stage i have no choice but to throw away a tyre with 90% life still left and replace it with a new one. Will definitely not settle for dunlops again.
Dear Krzysztof Lapacz
We are in receipt of your correspondence regarding your Dunlop SP6060.
Please be advised that the tyre should have been sent to our Jet Park Technical Centre for an assessment whereupon, if the Technical Team had deemed the cause to be a manufacturing defect, you would have received a replacement tyre or reimbursed to the value of the remaining tread life.
We are unsure why the fitment centre would have advised you to throw out the tyre before an assessment as this is a standard process in the tyre fitment industry and without the tyre, we are not in a position to provide an assessment.
Kind regards
Dunlop
Dear Krzysztof Lapacz
We are in receipt of your correspondence regarding your Dunlop SP6060.
Please be advised that the tyre should have been sent to our Jet Park Technical Centre for an assessment whereupon, if the Technical Team had deemed the cause to be a manufacturing defect, you would have received a replacement tyre or reimbursed to the value of the remaining tread life.
We are unsure why the fitment centre would have advised you to throw out the tyre before an assessment as this is a standard process in the tyre fitment industry and without the tyre, we are not in a position to provide an assessment.
Kind regards
Dunlop
